Wayne Kerr 65120,6540 LCR 電表 阻抗分析儀

　產品參數

WK6500/WK-6500 係列（liè）

英國Wayne Kerr 阻抗分（fèn）析儀 WK6505,6510,6515,6520,6530,6550,65120(取代 WK6540 )測試頻率為20Hz~5MHz,~10MHz,15MHz,~20HMz,~30MHz,~50MHz,~120MHz等,采用彩色觸控屏幕,可接因特網internet傳送測試數據。

電感（gǎn）量測範圍（wéi）0.1nH~100H,電（diàn）容量測（cè）範圍0.01p~>1F.測量參數有:L,Q,Z,C,D,R,DCR,ESR,X,Y,B,G,θ等.可”選購”內建100mA直流偏流源DC Bias current及40V直流電壓偏壓源DC Bias voltage。

具有阻抗掃描圖形分析（xī）功能:可選擇（zé）任何（hé）可用的量測參數並以頻率或AC電壓為掃描基準來執行圖形（xíng）掃描並顯示結果(可觀看頻率響應曲線及飽和諧振奌)以分析零件特性。

WK6500係列是目前市麵上高精度儀器"性能價格比"競爭力的產品,也（yě）是H/P, Agilent,安捷倫代用機（jī）.

規格表

阻抗分析儀 WK6500/WK-6500 (Technical Specifications 6540A)

Measurement parameters

Any of the following parameters can be measured and displayed:

AC Functions

·Capacitance(X) ·lnductance(L) ·Resistance(R)

·Reactance(X) ·Conductance(G) ·Susceptance(B)

·Dissipation Factor(D) ·Quality Factor(Q)

·lmpedance(Z) ·Admittance(Y) ·Phase Angle(0)

Display format

Series or parallel equivalent cicurit.

Test conditions

Frequency range

1 KHz to 120 MHz

Accuracy of set frequency ±0.005%

AC Drive level

10 mV to 1v rms*

200uA to 20 mA rms*

*Varies with frequency

Signal source impedance:50 nominal

DC bias current(optional)

100 mA to DC bias current

40V of DC bias voltage

Mode of operation

Graphical sweep mode

Allows graphical sweep lf any two

Measurenent parameters

Swept parameters:-frequency,drive level or DC bias

Meter mode

Allows the instrument to be used as a standard LCR meter.

Setup data

Up to 20 instrument setups may be stored locally

For each mode.