液壓起錨機 GB/T4447-2008

液壓起錨機 GB/T4447-2008 Hydraulic windlass GB/T4447-2008 液壓起錨機安裝在船舶艏艉部主甲板上，供船舶起錨、拋錨、係纜 Hydraulic windlass is installed on the ship bow and stern main deck, the ship sailed for, anchoring, mooring 技術指標: Technical indicators: 錨鏈直徑:Φ8-70mm Chain diameter: diameter 8-70mm 額定負荷:5-300KN Rated load: 5-300KN 起錨公稱速度:8m/min Anchor the nominal speed: 8m/min 電機功率:2-70KW Motor power: 2-70KW 電製: 220 380 440 690V Electrical system: 220380440 690V組成： Form. 由船用電機、油泵、液壓馬達耐磨錨鏈輪、絞纜筒、付卷筒、船用硬齒麵減速機、電氣控製箱/及無石棉環保刹車帶、離合器、底座等組成 By marine motor, oil pump, hydraulic motor wear anchor chain, warping drum, drum, pay face speed reducer, electric control box / and environmentally friendly non asbestos brake band, clutch, base and other components of hard ship 安裝使用注意事項： Installation notes: 1、 減速機、齧合齒輪、運動部件必須加油 1, speed reducer, gear, moving parts must refuel 2、 電器接線正確，空載運行二次各5分鍾 2, electrical wiring is correct, the no-load running two times every 5 minutes 交易說明： Description of transaction: 1、 客戶購買泰興市捷勝船舶設備有限公司出品的液壓錨機時需提供設備參數、要求。 Hydraulic anchor machine 1, customers buy Taixing City Jiesheng Marine Equipment Co. Ltd., is required to provide equipment parameters, requirements. 2、 技術協議書和認可圖為產品檢驗、交貨的依據。 2, technical agreement and approval plans for product inspection, the basis of delivery. 運輸： Transport: 產品按客戶要求的方式進行送貨 Products according to customer requirements of delivery 環保提示： Environmental tips: 產品使用過程中更換的液壓油、潤滑油應交給正式收集點處理。 Products used in the process of replacing the hydraulic oil, lubricating oil should be handed over to the official collection point processing. 產品不含汙染環境的物質，當丟棄使用壽命到期的產品時，應交給正式收集點處理。 The product does not contain the environmental pollution, the service life of the product when discarded expired, should be paid to the official collection point processing.