泰興市捷勝船舶設備有限公司

【 免費會員 】
小標  您所在位置:首頁 >> 公司簡介
企業焦點新聞
產品展示

捷勝船舶遊艇用錨機、絞盤高性價比喜獲央企大單

暫無產品圖片
  • 公司名稱:
  • 發布日期:
  • 所 在 地:
  • 產品型號:
  • 產品價格:
  • 點擊次數:
  • 泰興市捷勝船舶設備有限公司
  • 2014-09-27 15:23:19.0
  • 全國
  • 12.5-22
  • 10000
  • 1

【詳細說明】

遊艇用錨機--采用電動機(液壓馬達)等帶動擺線針輪減速機調速,驅動絞纜筒作正(反)轉。產品按GB/T4555-1995設計、製造。產品經過多國船級社檢驗,國內市場占有率達75%以上。性能穩定, The motor (motor) and drive the cycloid pin wheel reducer drive, the drive sheave tube is (anti). Products according to GB/T4555-1995 design, manufacturing. Products through the countries Veritas test, the domestic market share of more than 75%. Stable performance, 用途:產品安裝在艦船首、艉部主甲板上,在艦船起航時起錨或收纜,艦船停航拋錨、緊纜定位,為船舶係泊安全設備. Use: the product is installed in the first, the ship stern main deck, anchor or cable collecting in ship set sail, the ship broke down, suspended cable tightening positioning, as the ship mooring safety equipment 分類: Classification: 1、按形式分為電動和液壓。 1, the form is divided into electric and hydraulic. 2、按用途分為係泊絞車和錨機。 2, divided by use of mooring winch and anchor winch. 組成:采用亞光不鏽鋼絞纜筒、船用不鏽鋼錨鏈輪、船用行星減速機、進口船用帶刹車電機、主令電氣控製箱、主令控製器為IP56型及無石棉環保刹車帶等組成。 Composition: it is wear resistant marine anchor chain wheel, marine planetary reducer, import the marine band brake motor, main electric control box, a master controller for IP56 and non asbestos brake band composed of environmental protection. 主要技術參數: Main technical parameters: 1、錨鏈直徑:12.5—66mm 1, the diameter of anchor chain: 12.5 - 66mm 2、工作負荷:5.5—123kN 2, work load: 5.5 - 123kN 3、絞車拉力:5.5—110kN 3, winch pull: 5.5 - 110kN 4、電機功率:3—45KW 4, motor power: 3 - 45KW 產品使用、安裝注意事項: Product use, installation notes: 1、產品使用前檢查油泵及減速機油位! 1, the product before use, check the pump and gearbox oil level! 2、產品應空載運行2次各2分鍾! 2, the product should be no-load operation for 2 times every 2 minutes! 3、產品在額定拉力和額定速度下,應能連續工作30min,並應能在不小於1.5倍額定拉力的(de)過載拉力作用下連續工作2min。 3, products in the rated capacity and rated speed, can work continuously for 30min, and 2min continuous work overload force in not less than 1.5 times the rated pull down.
| 公司介紹 | 產品展示 | 公司動態 | 企業招商 | 企業招聘 | 詢價留言 | 聯係我們 | 會員登陸 |
數控機床市場網 設計製作,未經允許翻錄必究.Copyright(C) 2011 http://www.xqxcj.com/, All rights reserved.
以上信息由企業自行提供首麵,信息內容的(de)真實性、準確性和合法性由相關企業負責,數控機床市場網對此不承擔任何保證責任。